WPC Column Wrap Panel 180x24mm Outdoor Pier and Pillar Cladding Board

WPC Column Wrap Panel 180x24mm for Piers and Pillars

XINGJI WPC column wrap panel turns a bare concrete or steel pier into a finished timber column without render, paint or a joiner. The 180x24 mm boards are fixed to battens around the column and mitred at the corners, so a square pier reads as a solid timber post from every approach. The wood plastic composite body is weatherproof and does not rot at the base where rain splashes, which is where a timber casing usually fails first. The same board suits carport posts, pergola legs and boundary piers, and the matte grain can be matched to the fencing and cladding on the same site.

Key Features

• 180x24 mm board wraps a pier on four faces
• Weatherproof, will not rot at the splash line
• Mitred corners give a solid timber-post look
• Screwed to battens, no render or painting
• Matches the fencing and wall cladding on site

Specifications

WPC Column Wrap vs Timber Casing

FAQ

1. Can it wrap a round column?
The boards are straight, so a round column is clad in short segments to form a faceted drum. On large radii this reads as a deliberate panelled column.

2. How are the corners finished?
Boards are mitred at 45 degrees on site and fixed to corner battens, so the joint closes tight and no trim is needed.

3. Does it need ventilation behind?
Yes, a batten cavity is standard practice. It keeps the board off the damp substrate and lets the pier breathe.