WPC Slat Wall Panel for Home Office and Streaming Studio Backdrop 219x26mm

WPC Slat Wall Panel for Home Office and Streaming Studio Backdrop

XINGJI WPC slat wall panels give a home office, podcast corner or streaming studio the warm vertical rhythm of timber battens without the cost, weight or upkeep of solid wood. Each board carries four deep ribs across a 219 mm face, so a wall reads as a run of separate battens rather than a flat sheet, and the depth between the ribs breaks up a large blank surface behind a desk or camera.

The board is a wood-plastic composite: wood flour bonded in a polymer matrix, which keeps it dimensionally stable when a room swings between heated and unheated, and lets it be wiped clean rather than oiled. Boards are fixed with stainless screws to timber or aluminium battens, with the screw heads set inside the groove and covered by the next board, so the finished wall shows no visible fixing.

The same board is used on office feature walls, reception backdrops, home cinema walls and hospitality interiors. Standard colours are held in stock for sample orders, and custom colour matching, cut-to-size lengths and OEM packing are available for project orders.

Key Features

• 219 x 26 mm quadruple-rib profile, four deep slats across each board face
• Wood-plastic composite core: stable in heated rooms, no swelling at the joints
• Embossed wood grain with a matte finish that does not show fingerprints
• Hidden fixing: stainless screws set in the groove and covered by the next board
• Waterproof and wipe-clean, no oiling, staining or repainting
• Termite resistant, not a food source for insects
• 8 standard colours, custom colour matching available for project volumes
• Cut-to-size lengths and OEM/ODM packing for container orders

Specifications

Where It Is Used

• Home office desk wall and video-call backdrop
• Podcast and streaming studio backdrop behind the camera
• Office reception and meeting room feature wall
• Home cinema and media room rear wall
• Hotel guest room desk wall and corridor end wall
• Retail display niche and shop counter backdrop

Installation, Step by Step

WPC Slat Wall Panel vs Timber Batten Wall

Care and Maintenance

• Dust with a dry microfibre cloth or a vacuum brush on the rib face.
• Wipe marks with a damp cloth and a pH-neutral household cleaner; dry afterwards.
• Do not use solvent cleaners, scouring pads or wax polish on the matte face.
• No oiling, staining or repainting is needed at any point in the service life.

Packing and Loading

FAQ

1. Is the 219 mm board one piece with four ribs, or four separate battens?
One extruded board carries four ribs across its 219 mm face. It is installed as a single board per course, which is faster than setting individual battens and keeps the rib spacing even.

2. Will the wall look like real timber?
The face is embossed in register with a wood-grain print and finished matte, so at normal viewing distance it reads as stained timber. Up close the surface is more uniform than solid wood, which is the trade-off for the stability and the lower cost.

3. Can I fix it to plasterboard without battens?
Only where the plasterboard is sound and the fixings land in studs. For a flat, continuous wall we recommend battens: they bring the wall into plane and give the screws something solid to bite into.

4. How do I hide cables behind a desk wall?
Set the battens out to leave a 25-30 mm service void behind the boards, run cables in that void, and bring them out through a cut-out finished with a brush plate or a trim.

5. Does it help with echo in a small room?
The ribbed face and the void behind the boards break up a flat hard surface, which reduces the sharp slap echo in a small room. It is not a substitute for purpose-made acoustic panels where a measured reduction is required.

6. Is it suitable for a bathroom or a kitchen?
The board is waterproof and wipe-clean, so splash zones are fine. Keep it away from direct heat sources such as a hob or a stove flue.

7. What colours are available?
Eight standard colours are held for sample and stock orders, and custom colour matching is available for project volumes.

8. Can you supply cut-to-size lengths?
Yes. Standard stock lengths ship immediately; cut-to-size lengths and pre-drilled boards are produced to order.

Why XINGJI

XINGJI has produced wood-plastic and stone-plastic wall panels since 2016, with extrusion, embossing, coating and packing under one roof. Orders are quoted with the profile, colour and packing confirmed in writing before production, and OEM/ODM work is supported from sample to container.