Sodalite Blue Marble SPC Wall Panels Polished Stone Look Waterproof Interior Wall Cladding

Sodalite Blue Marble SPC Wall Panels

XINGJI Sodalite Blue marble SPC wall panels bring a deep navy-blue stone with fine white calcite veining to interior walls, a colour that reads almost black in low light and opens into cobalt where daylight reaches it. On a bar back, a hotel reception or a bathroom vanity wall it gives the density of a polished natural stone slab without the slab weight, the crane access or the sealing regime.

The panel is a stone-plastic composite: ground limestone bonded in a polymer matrix with a printed and wear-protected decor layer on top. That construction keeps the board at a fraction of the weight of stone, stable in wet rooms and busy circulation areas, and lets two panels butt together on a hairline seam that reads as one continuous face.

Boards are 600 mm and 1200 mm wide and 4 mm thick, interlock tongue-and-groove, and are fixed glue-free over a flat existing wall, so a refurbishment can be finished without a wet trade. Standard stock runs ship immediately; longer lengths, edge profiles and OEM packing are produced to order.

Key Features

• Deep navy-blue base with fine white calcite veining, polished finish
• Hairline click-lock seam: two panels read as one continuous slab
• Waterproof SPC core, no added formaldehyde
• Approx. 1.97 kg/m2, light enough for a single-person install
• UV-cured wear layer resists scuffs and cleaning chemicals
• Available in 600 mm and 1200 mm widths, 4 mm thick
• Glue-free tongue-and-groove over a flat existing wall
• Cut-to-size lengths and OEM/ODM packing available

Specifications

Where It Is Used

• Hotel and cocktail bar back walls
• Reception and lobby feature walls
• Bathroom vanity and shower walls
• Restaurant and club washroom walls
• Lift lobby and corridor feature panels
• Residential media wall and fireplace surround face

Installation, Step by Step

SPC Blue Marble Panel vs Polished Stone Slab

Care and Maintenance

• Wipe with a damp cloth and a pH-neutral cleaner; dry the surface afterwards.
• Do not use abrasive pads, scouring powder or solvent cleaners on the polished face.
• No sealing, oiling or re-polishing is required at any point.
• For a satin rather than gloss look, specify the matte variant when ordering.

Packing and Loading

FAQ

1. Is this a real marble slab?
No. It is a stone-plastic composite board with a marble decor layer. The visual result is close to polished stone at normal viewing distance, while the board stays light, waterproof and glue-free to install.

2. Will two panels line up without a visible seam?
The boards interlock tongue-and-groove on a hairline joint, and the decor is laid out so the veins continue across the seam. From a normal viewing distance the wall reads as one face.

3. Can it go in a shower?
Yes. The core is waterproof and the face is non-porous, so it suits shower and vanity walls. Seal the perimeter and any cut edge with a neutral silicone.

4. How does it handle heat near a fireplace?
The board is suitable as a decorative surround face away from direct flame and radiant heat. Keep a clearance to the firebox and follow the appliance manufacturer's clearance figures.

5. Does the blue fade in daylight?
The decor sits under a UV-cured wear layer that limits colour shift indoors. As with any interior decor surface, long-term direct sun on the same panel is not recommended.

6. What is the cut edge like?
The cut edge shows the SPC core in a stone-grey tone. It is normally closed by a trim, a corner profile or a shadow gap rather than being left exposed.

7. Can I fix it over tiles?
Yes, provided the existing tiles are sound and flat. Where the old surface is glossy, key it lightly and fix through the groove flange as usual.

8. Do you supply matching trims?
End caps, internal and external corners and skirting profiles are available in the same decor for project orders.

Why XINGJI

XINGJI has produced stone-plastic and wood-plastic wall panels since 2016, with printing, wear-layer lamination, profiling and packing under one roof. Every order is quoted with decor, width, edge and packing confirmed in writing before production, and OEM/ODM work is supported from sample to container.